Monthly Archives: August 2015

A Home Appliance Repair Guide

When you try to fix any device it must be inspected first. It is really important to read the manual and check the parts. Generally manual will contain diagram of all the parts which can help to find the parts and which is not working. When a machine is not working one must check if the plug is working properly or not. If there is no problem with the plug, check if the fuses or circuit have broken down. If all these things are perfect then unplug the machine before you do anything else. As it is dangerous to work with electrical device, precautions must be taken.

Problems arising with Appliances

When working with any gas appliances first thing to be done is to shut off the gas supply. Once you have check and seen that you won’t get any shock, check the problem and try to fix it. You can go through the chart, then go through the instructions accordingly and proceed to repair them. It is common that the appliances get repairs after few years, so first have a look at machine working which will give a solution.

When you have problem with the washers, like if it is operating in spin mode and does not fill with water, or water overflows, if water does not reach high level and gets filled at low level only or there is a problem in drain system. Then check with the valves, belt, and drain pipe. In case of clothes dryers sometimes no heat is generated but dryer runs, clothes don’t get dried but the heat supply is on, sometimes dryer does not run, sometimes the drum will not turn but the motor functions properly. Then, the thermostat may not be functioning, check with vent, fuse and any obstruction occurred for rotation of drum.

When there is a problem with gas appliances like ignition problem, no heating, no proper heat supply, only one element is functioning. Then there may be problem in burner like something got clotted or some power cord got burnt. In case of oven, there might be problem with the timer. If there are troubles in refrigerator like if the units runs without break and if the refrigerator is too cold, too much water gets leaked below the refrigerator and if the total refrigerator stops running for more than one to two hours, then all you need to check is if the power supply is on, or if there is any problem with the thermostat or any fuse problem. There may be any problem with the drain line or there may be any air circulation problem or coils problem. In case of Air conditioner, if the unit does not run, unit runs but does not cool properly, there is a leakage from indoor unit then there they need to clean the filters or check with the running of fan, there may be any particle obstructing the drain. So, check with the manual and try to spot the defect and you can easily fix it. In case of any issues further arising, you may visit for more knowledge and information.